Loading...

Permatex® Gas Tank Repair - 1 oz

NAL#: 12020


Price: $5.25

  • Permatex® Fuel Tank Repair is a new, industrial strength formulation that is highly resistant to ethanol that is found in many fuel types.
  • Use to make permanent repairs on fuel tanks and gas cans.
  • No tank removal required.
Directions:
  1. To achieve optimum adhesion, clean grease or dirt off surfaces to be repaired.
  2. Wearing gloves twist or cut off required amount.
  3. Mix by kneading epoxy stick to a uniform color. If mixing is difficult, warm epoxy stick to room temperature or slightly above.
  4. Apply to the repair surface within 30 minutes of mixing, forcing into any cracks or holes to be filled.
  5. Remove excess material with a tool moistened with clean water before hardening begins.
  6. NOTE: When applying to a damp, wet or slowly leaking area, work the mixed epoxy into the surface and apply pressure until adhesion begins to take effect. Fuel Tank Repair epoxy sets in 1 hour, can be machined in 5 hours, and fully cures in 24 hours. Does not adhere to polyethylene or polypropylene plastics. This material is not intended for structural bonding.
 

FREE Shipping
on your order of $150 or more.

*Exlcudes gas tanks.